Some Of The Steps For Wall Mural Prep

Nothing fills a professional Wall mural hanger's heart with more dread than hearing a homeowner say, "my walls are already smooth and prepared for paper." Contrary to popular belief, most wall mural actually magnifies, instead of hides, flaws in the walls. In fact, what might seem "smooth" for an untrained eye, will often appear quite rough once the paper is hung and dry. Wall mural prep, done properly, has become the best step when it comes to achieving a satisfying end product. And from a practical standpoint, Wall mural prep is the best way to make sure your wall muraling job is going to stick.

Prepping for Wall mural Starts with Surface Repair
The first Wall mural prep objective ought to be achieving as smooth a wall as you possibly can. That means you're going to need to repair any nicks, dents, holes, and scratches that have accumulated inside your drywall or plaster through the years. Use a drywall compound for those who have regular drywall, along with a gypsum based filler to correct plaster walls. Use the filler having a spatula, after which watch for it to dry before gently sanding it smooth. If you want to be thorough, use a second layer of compound before sanding, since this material shrinks some as it dries.

Repairing Large Cracks and Fissures
Spot application of compounds and fillers with a spatula is fine for repairing smaller wall blemishes, but when you've got a larger crack or hole within the wall, you will need to do some bit more while prepping for Wall mural. Remember, your Wall mural will shrink and pull on your wall as it dries. That being the case, simply filling large cracks and holes with compound isn't going to cut it. Depending on the extent of the damage, you'll need to apply some joint tape after which apply the compound or filler over that. And if you've got a real hole, you are going to have to install a larger drywall patch.

Smoothing Textured Walls
Besides repairing wall blemishes, you will also have to address any texturing your walls in your Wall mural prep. Whatever you do, do not attempt sanding the feel down! Sanding down this type of large surface usually results in an uneven wall, that is what you're trying to avoid in the first place. Instead, you will want to use a new layer of joint compound or finishing plaster over the surface, and canopy in the texture instead. It is a big job, and a tough someone to reach turn out right. If you're trying to remove (i.e. hide) texture, it should be smart to call in an expert to complete the job for you personally. This prepping for wall mural step will take them a fraction of the time, and you will be much more pleased with the outcome.

Clean Your Walls
The ultimate part of Wall mural prep is cleaning the walls. Wipe down the walls having a vinegar means to fix remove all dust and debris. This task is especially important if you've applied new compound or plaster. You're going to need to take away the dust caused by everything sanding. Also, if you have any large stains, take care of those as well. Just covering them up with Wall mural isn't a wise decision, being that they are likely to work their way with the paper over time.

Time for you to Paper
When your walls are smoothed and cleaned, you need to apply the paper. Be sure to follow installation guidelines carefully, or you will find yourself studying the entire process again before you know it. And when all of this sounds just a little overwhelming, don't be put off by hiring a professional Wall mural hanger to complete the work for you. A professional is going to do the whole job, from Wall mural prep on right through to installation, leaving you time you have to tack additional chores off that to-do list.